Offer

KDF front disc mowers


Description

 

Type KDF 260 KDF 300 KDF 340

KDF 390

Fortschritt

KDF 300 S KDF 340 S KDF 300 W
Working width [m] 2,60 3,00 3,40 3,90 3,00 3,40 3,00
Swath width [m] 0,90 - 1,10 1,30 - 1,50 1,80 1,60 - 2,30 1,40-1,70 1,40 - 1,80 1,40-1,70
Number of discs [pcs.] 6 7 8 9 7 8 7
Number of knives [pcs.] 12 (6x2) 14 (7x2) 16 18 (9x2) 14 (7x2) 16 14 (7x2)
RPM [rpm./min] 1000 1000 1000 1000 1000 1000 1000
Power demand [HP] from 70 from 80 from 90 from 82 from 100 from 110 from 100
Working capacity [ha/h] ~ 2,8 ~ 3,5 ~ 4,0 ~ 3,0 ~ 3,5 ~ 4,0 ~ 3,5
Weight [kg] 805 915 980 820 1130 1140 1215

 




Folders


 

 

ENG1

   
  DISC MOWERS  
 

pdf_ikona

Document size: 7,5 MB  




 



Technical Details

 

1

Front disc mowers KDF mounted on tractor's front 3-point linkageare excellent alternative to rear disc mowers with regard to good visibility during work and transport.



 
2 Advantages and equipment of KDF mowers:

• Tractor's triangle in standard equipment
• PTO shaft with overrunning and friction clutch in standard equipment
• Mechanical lock for transport
•„Floating cut" – modern, extended suspension frame and springs with high pitch enable better ground following (+250 mm, - 150 mm) and regulation of proper pressure on the ground
• Hydraulic cylinders in standard equipment – facilitate manouvering and transport
• Working width indicator in standard equipment
• Safety guard of PTO shaft secures against dirt and fast wear of the shaft
• Flow dividors enable even lowering and lifting of cutting unit by means of only one hydraulic connector
• Swath width regulated by swath guides
• Quick change of rpm direction
• Effective lightening (spring or hydraulic)
• Good visibility during operation and transport
3
     

 
7
Extended frame and springs with higher pitche

strzalka_prawo
Flow dividors
4
     
 
5 Mechanical lock
strzalka_lewo


strzalka_prawo
PTO shaft's guard
6
     

 
The advantages of tine and roller conditioners are similar to the ones in KT mowers. The difference is only in drives design. KDF conditioners are interchangeable with one another.
     
 
10 KDF 300 – tine conditioner's drive
strzalka_lewo
strzalka_prawo
KDF 300 – roller conditioner's drive
11
     
 

 

KDF 390 - Fortshritt
8

 
9 Advantages of KDF 390:

• Light design
• Quick knife replacement
• High working width
• Smooth regulation of cutting height and swath width
• Swath guides forming up to 2 m even swath
• Front safety guard regulation
• Lifted side safety guards
• Very good visibility during work from operator's cabin



 

napis
1
Basing on the experience of our customers in Poland and in Western Europe we have introduced to our production a new model of cutterbar: Perfect CUT. Precise cut, high durability of components, protection against sudden disc stop in case of coming into an obstacle, quick and easy disc module replacement owing to modernized upper disc hub are the main advantages of Perfect CUT cutterbars. New cutterbar is mounted in every SaMASZ disc mower apart from KDL series based on Comer cutterbar.
       
2
Main advantages of PerfectCUT cutterbar:
1. Smooth regulation of cutting height from 4 to 7 cm.- sliding skids from 5 to 9 cm
2. 6307 2RSN bearings in bevel gears and 6307 2RS in disc modules are the most durable and unprecedented among our european competion.
3. Specially hardened discs and sliding skids made of Boron steel, protected against mud and dirt by means of the blades.
4. Easily replaceable knife holder pins.
5. Hardened knife holder made of Boron steel, especially designed in order to eliminate stucking of the knives under the disc.
6. Innovative system of quick knife replacement. The knife can be changed only when the disc is adjusted sheer to the cutterbar (+ - 30 degrees). The system decreases the probability of knife loss almost to absolute minimum in case of hitting into stone.
7. Modernized, hardened sliding skids made of Boron steel protect the whole surface of cutterbar on the bottom. Quick and easy replacement of the skids (only two bolts to unscrew).
8. Additional steel skid protecting cutterbar's drive.
9. Hardened cutterbar made of steel.
10. Protection against stones in standard equipment.
11. Quick and easy replacement of disc module thanks to modernized upper hub.
12. Bevel gears with 25 mm tightness.
13. High quality knives comply with strict safety rules. SaMASZ logo engraved on the knife is a guarantee of its quality.

 

1 Protection against stones in standard equipment

Specially designed disc module protects the cutterbar with bevel gears in case of very strong, extreme hit of the disc e.g in a stone. The force of the hit cuts off only the key. Then, only the module needs to be replaced without the necessity of expensive cutterbar repair. The replacement of the module takes only a while and can be done on the field. Owing to that solution the time crucial during forage pick-up is spared. Modernized upper disc hub enables quick module replacement. Special cavities for bolts make it very easy to disssemble the module without the necessity of unscrewing upper hub. The drive of the discs is transmitted by means of bevel gears with high diameter, which increases the resistance of the disc in case of hitting into an immovable obstacle.

 

2 Comparison of bevel gears
Our mowers are equipped with Perfect CUT cutterbars based on bevel gears transmitting higher strength.
       
5 Perfect quality of cut with Perfect CUT cutterbar
New Perfect Cut cutterbars have high quality of cutting even with very low grass during 3, 4 and further cuts. During 1 and 2 cut when high grass prevails it is recommended to cut with height between 53 mm and 68 mm. Depending on the angle of cutterbar's inclination there are the following cutting heights.
       
3 Perfectly profiled design
Rounded shapes of cutterbar's bottom surpass the designs of other manufacturers. Streamline shape facilitates operation on more earthen and stoney meadows. No sharp edges on the whole cutterbar, smooth surfaces of sliding skids give protection to the turf.
       
4
Quick knife replacement by means of special key.

 

Gallery

1 2 3 4  
5 6 7 Kosiarki_dyskowe/KDF czołowe