Offer

KB - middle class


Description

 

Type KB 110 KB 140 KB 160
Working width [m] 1,10 1,40 1,60
Number of knives [pcs.] 10 12 14
RPM [rpm./min] 540
Power demand [HP] from 20 from 40 from 60
Working capacity [ha/h] 0,50 0,60 1,00
Tractor class I-II I - II I - II
Length [mm] 1090 1250 1250
Width [mm] 1400 1800 1900
Height [mm] 900 900 900
Weight [kg] 325 465 500



Technical Details


5

 

FLAIL MOWERS FRONT-REAR
MIDDLE CLASS

 

Flail mowers – mulchers are designed to operations connected to municipal maintenance, green belts and orchards. These machines are used to mulch grass, thicket and bushes (up to 10 cm) and cut weed on undeveloped areas with intention to leave the swath. Mulchers’ main task is to cut the grass and spread it properly crumbled along the whole width of cut surface. It enables forming a natural swath, mineralizing plant remnants and their introduction to the ground.

 

1 KB middle class mowers are ideal for mulching barrens, drives in orchards, thicket and grass on undeveloped areas. Tough housing and inclined rubber safety guard enable safe mowing near roads, parks and other busy and populated places.
   
2 Characteristic:

1. Power transfer using a belt transmission also acts as an overload clutch,

2. Preparing the mower to work on the front of the tractor consists of reinstalling the suspension mount on the other side of the mower. If the tractor has the reverse option (left revolutions) the user can, on his own, change them by removing the central transmission and rotating it by 180°,

3. The mower is manually adjusted right or left in relation to the tractor. As part of standard equipment a telescoping shaft is installed,

4. The new stronger housing and spherical bearing were additionally protected from external damage.
 

 
3


Hydraulic side adjustment up to 40 cm – in optional equipment.
 
 


Proper use:

1. Mulching thicket and bushes (up to 8 cm),
2. Mowing weed and grass on undeveloped areas – average working conditions.

Advantages:

1. Properly selected flail’s weight (1 kg), precise mounting as well as spring placing on the shaft enable operation in tough conditions,
2. Mounted on 3-point linkage frame at the back or on the front of the tractor,
3. Simple flail replacement,
4. Ideal adjustment to the ground and even working height,
5. Silent work of working shaft,
6. High quality chains on the front and rubber safety guard at the back enable efficient protection against throwing of stones,
7. PTO shaft with overrunning clutch in standard equipment,
8. Working height,
9. Reinforced housing and bearings of the ground following shaft,
10. Easily replaceable skids made of wear resistant steel,
11. Additional reinforcement of the housing on the inside and on the side using the hard and wear-resistant steel.
   
   
 
TYPES OF FLAIL KNIVES
Typ I KNIFE TYPE I
Designation: grass shrubs, stalks, trimming remnants, stubbles
Max. diameter of cut branches: ϕ 80 mm
 
 
 
 
 
FLAIL MOWERS - MULCHERS
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar





Folders




 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  




 




Gallery


  1 (2) 1 (3) 1 (4) 1 (5) 1 (6) 1 (7)   



Movies


 

Kosiarki serii KBK o szerokościach roboczych 2,00 m i 2,50 m zostały zaprojektowane w szczególności z myślą o rolnictwie. Znajdują one zastosowanie przy mulczowaniu trawy, kukurydzy oraz resztek przyciętych gałęzi. Zostały one wyposażone w otwierana klapę wyrzutową, która znacznie ułatwia obsługę kosiarki oraz zapewnia swobodny rozrzut pokosu na zewnątrz maszyny, co wpływa na mniejsze zapotrzebowanie na moc ciągnika.
Wzmocniono równiez układ zawieszenia tak, aby sprostał jeszcze większym obciążeniom. Wewnętrzna obudowa mulczera składa się z dwóch płaszczy, z których wewnętrzny wykonany jest ze stali trudnościeralnej HARDOX.
Kosiarki serii KBK idealnie nadają się do pracy na ścierniskach kukurydzy, zbóż i innych upraw. Szczególnego znaczenia nabiera w ostatnich latach mulczowanie rżyska kukurydzy, jako skutecznego sposobu zwalczania omacnicy prosowianki, coraz bardziej zagrażającej kukurydzianym plantacjom. Zmulczowanie rżyska kukurydzy przyspiesza rozkład i niszczy znaczną liczbę gąsienic omacnicy prosowianki oraz dużą część zarodników grzybów chorobotwórczych w rżyskach zbóż.

 

Additional Equipment

Flail knife types
 
STANDARD OPTION
1 1 1
VII VIII X

 



KNIFE TYPE VII - Designation: grass, plant stalks, Max. diameter of cut branches: ϕ 20 mm
KNIFE TYPE VIII - Designation: grass, plant stalks, shrubs, shoots, thin branches, Max. diameter of cut branches: ϕ 20 mm

KNIFE TYPE X - Designation: grass, plant stalks, small shrubs, branches, Max. diameter of cut branches: ϕ 35 mm