Offer

EMU 160 UP - Self-collecting flail mower with container


Description

 

Type EMU 160 Up
Working width [m] 1,60
Number of knives [pcs.] 14
RPM [rpm./min] 540
Power demand [HP] from 60
Working capacity [ha/h] 1,00
PTO shaft [Nm] 540
Tractor class II
Length [cm] 190
Width [cm] 196
Height [cm] 165
Grass emptying height [m] 2 m
Container volume [m3] 1,4
Weight [kg] 905

Technical Details

 

EMU 160 Up

EMU 160 Up allows for long lasting and defect free operation related to maintenance of municipal infrastructure. Has container with capacity of 1.4 m3. The mower’s main advantage is possibility of emptying the container directly onto a trailer up to 2m.

Main advantages:
- possibility of emptying container directly onto trailer,
- strong and durable construction,
- hydraulics allow for emptying collected material from container,

Machine can be equipped additionally with:
1. Rear support wheels to improve stability
and allow the machine to be used with light-weight low-power tractors,
2. Front support wheels for better soil adapting, the same as adapting roller. Height of wheels can be adjusted within 6cm range by spacers.
3. Tiller is mounted when KBZP 160 mower is already equipped with rear support wheels and is used to improve operation as well as makes manoeuvring of mower easier, therefore mower equipped with rear support wheels and tiller is driven quite as single-axis trailer.

 

TYPES OF FLAIL KNIVES
STANDARD ON ORDER
1 2 3 4
TYPE I TYPE II TYPE III TYPE IV

 

Flail knives TYPE I - of high weight (1kg) and high knife hardness. Is the most popular type of flails in Poland.
Knives TYPE II - are very popular in the West. Require high culture of greenery.
Knives TYPE III - designed for mowing trees and shrubs.
Knives TYPE IV - for mowing grass, straw, cornstalks, tobacco and trimming post-harvest remains.









Folders


 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  

 

Gallery

EMU_160_UP_1 EMU_160_UP_2 EMU_160_UP_3 EMU_160_UP_4  
         
         
         

 


Additional Equipment

 

EMU 160 Up  

1m_5
1m_6
  -Rear support wheels are designed for EMU 160 Up mower when it is attached to a "small" tractor, which has too low a load of its 3-point linkage or when lifting the machine onto 3-point linkage it looses stability (tractor front wheels are lifted above the ground). These are used to transport the machine particularly on the wheels (mower during operation "drives" on adapting bar, while rear support wheels are lifted). Thanks to hydraulic controlled wheel height, for mowing the wheels should be lifted maximally up while on headlands or for transport the wheels are lowered, what causes the entire machine to be lifted 20 cm up. In result the tractor is unloaded and stability is improved. When emptying cut grass container thanks to rear support wheels, it is possible to raise emptying height up to 2.2m. If EMU 160 Up mower is equipped with rear support wheels, then the machine can be attached to the tractor only with lower 3-point linkage arms. For mowing needs the mower is supported on the adapting bar, while for transport onto rear support wheels. These are self-torsion (best, if the mower is attached to the tractor with use of 3-point linkage), also featuring possibility of locking
1m_4   -Front support wheels are used for soil adapting, the same as adapting roller. Height of wheels can be adjusted within 6cm range by spacers. As an option, a pair of front support wheels (2pcs.) is assigned for a single machine.
    Tiller is mounted when EMU 160 Up mower is already equipped with rear support wheels and is used to improve operation and makes manoeuvring of mower easier, therefore mower equipped with rear support wheels and tiller is driven quite as single-axis trailer. In this case rear wheels need to be locked for driving straight ahead. Tiller features hydraulic control of height, so the machine can be lifted up for transport. In the event of mounting the tiller, the machine is then equipped with longer PTO shaft.