Offer

EMU 160 S - Self-collecting flail mower with container


Description

 

Type EMU 160S
Working width [m] 1,60
Number of knives [pcs.] 14
RPM 540
Power demand [HP] from 60
Working capacity [ha/h] 1,00
Tractor class II
Length [cm] 190
Width [cm] 196
Height [cm] 125
Container volume [m3] 1,2 
Weight [kg] 710


Technical Details

 

EMU 160 S
 
Thanks to lowering container for mowed grass EMU 160 S flail mower provides better visibility from the operator’s cabin.
Has 1.2 m3 container which is emptied with use of tractor’s hydraulics.

Moreover, the machine can be additionally equipped with front support wheels for better soil adapting, the same as adapting roller. Height of wheels can be adjusted within 6cm range by spacers.
 
1 4  
     
 

 

FLAIL MOWERS - MULCHERS
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar

     
 




Folders



 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 6,6 MB  

 


Gallery

 

EMU_160_S_1 EMU_160_S_2 EMU_160_S_3 EMU_160_S_4  
EMU_160_S_5 EMU_160_S_6 EMU_160_S_7 EMU_160_S_8  
         
         


Additional Equipment

 

EMU 160 S  
1m_3   -Front support wheels are used for soil adapting, the same as adapting roller. Height of wheels can be adjusted within 6cm range by spacers. As an option, a pair of front support wheels (2pcs.) is assigned for a single machine.