Offer

KDD-R WITH REVERSE

Description

Type KDD-R 861 KDD-R 941
Working width [m] 8,60 9,40
Swath width [m] 2 x 1,90 - 2,30 m
1 x 1,30 - 1,50 m
2 x 2,30 - 2,70 m
1 x 1,30 - 1,50 m
Number of discs 21 23
Number of knives 42 46
RPM [rpm./min] 1000 1000
Power demand [HP] from 150 from 160
Working capacity [ha/h] ~10 ~11
Weight [kg] 3 300 3 500

 


Technical Details

 

COMBINATION OF THREE MOWERS ADJUSTED TO TRACTOR WITH REVERSE
 
Combination of mowers MegaCUT 860 R comprises two-sided disk mower KDD – R 860, equipped with integrated 3-point linkage frame assembly with load of 1600 kg and front disc mower KDF 300, suspended on 3-point linkage frame of two-sided mower. Such combination of mowers allows for machine’s comfortable operating, with no need for tractor’s operator to look on sides.
Head mower can be complemented with KDD-R mowers, what results in obtaining mowing width of 8.60 m and productivity of approx. 10.0 ha/h.

Two-sided mowers are centrally suspended. Cooperates in combination with 3.00 m wide front disk mower. It is perfect alternative for expensive self-driving mowers.
 

Combination of mowers MegaCUT 860 R comprises two-sided disk mower KDD – R 860, equipped with integrated 3-point linkage frame assembly with load of 1600 kg and front disc mower KDF 300, suspended on 3-point linkage frame of two-sided mower. Such combination of mowers allows for machine’s comfortable operating, with no need for tractor’s operator to look on sides.

 

10

 

Two-sided mowers are centrally suspended. Cooperates in combination with 3.00 m wide front disk mower. It is perfect alternative for expensive self-driving mowers.



3

 
Operating with reverse

If tractor with reverse is used, front mower KDF 300 may be suspended on common frame of two-sided KDD + KDD reverse mower. Such solution significantly improves comfort and mower combination operating quality.


Central suspension

Mower’s central suspension causes even distribution of mower’s weight on entire length. It enables better reaction for terrain unevenness, what results in fast and clean mowing.

 

KDD-R 860 mower is equipped with extra frame, after assembly of which there is possibility of attaching KDD-R 860 mower at tractor’s rear, and KDF 300 mower at front as usual.

Head mower can be complemented with KDD-R mowers, what results in obtaining mowing width of 8.60 m and productivity of approx. 10.0 ha/h.

 

1
 
 
Advantages of KDD mowers:

1. Expansive width.
2. High productivity.
3. 2 year warranty.
4. Optimal weight distribution.
5. Possibility of operating with only one rear mower with the other one disconnected.
6. Possibility of applying user’s own 3.00 m wide front mower.
7. Setting mower to transport, operating position and
driving over swaths with use of two mower’s hydraulic cylinders.
     

 
 

4


 
 
In MegaCUT 860 R (REVERSE) mower combination we applied modern hydraulic safety device, which protects cutterbar from damage. In the event of hitting an immovable obstacle the 3-point linkage frame folds back about 30° and at the same time rises up by approx. 70cm.
 

 
  Transport

Lifting KDD mowers on headland or to transport position at the same time, thanks to applying flow divider, requires only one hydraulic outlet in tractor.
  KOSIARKI DYSKOWE/KDD R    
     
 
  5   Overlapping of cutting units

Overlapping between front mower and rear mowers is set on 375 mm. In MegaCUT set collected swaths always form three windrows.

 

2



 

napis
1
Basing on the experience of our customers in Poland and in Western Europe we have introduced to our production a new model of cutterbar: Perfect CUT. Precise cut, high durability of components, protection against sudden disc stop in case of coming into an obstacle, quick and easy disc module replacement owing to modernized upper disc hub are the main advantages of Perfect CUT cutterbars. New cutterbar is mounted in every SaMASZ disc mower apart from KDL series based on Comer cutterbar.
       
2
Main advantages of PerfectCUT cutterbar:
1. Smooth regulation of cutting height from 4 to 7 cm.- sliding skids from 5 to 9 cm
2. 6307 2RSN bearings in bevel gears and 6307 2RS in disc modules are the most durable and unprecedented among our european competion.
3. Specially hardened discs and sliding skids made of Boron steel, protected against mud and dirt by means of the blades.
4. Easily replaceable knife holder pins.
5. Hardened knife holder made of Boron steel, especially designed in order to eliminate stucking of the knives under the disc.
6. Innovative system of quick knife replacement. The knife can be changed only when the disc is adjusted sheer to the cutterbar (+ - 30 degrees). The system decreases the probability of knife loss almost to absolute minimum in case of hitting into stone.
7. Modernized, hardened sliding skids made of Boron steel protect the whole surface of cutterbar on the bottom. Quick and easy replacement of the skids (only two bolts to unscrew).
8. Additional steel skid protecting cutterbar's drive.
9. Hardened cutterbar made of steel.
10. Protection against stones in standard equipment.
11. Quick and easy replacement of disc module thanks to modernized upper hub.
12. Bevel gears with 25 mm tightness.
13. High quality knives comply with strict safety rules. SaMASZ logo engraved on the knife is a guarantee of its quality.

 

1 Protection against stones in standard equipment

Specially designed disc module protects the cutterbar with bevel gears in case of very strong, extreme hit of the disc e.g in a stone. The force of the hit cuts off only the key. Then, only the module needs to be replaced without the necessity of expensive cutterbar repair. The replacement of the module takes only a while and can be done on the field. Owing to that solution the time crucial during forage pick-up is spared. Modernized upper disc hub enables quick module replacement. Special cavities for bolts make it very easy to disssemble the module without the necessity of unscrewing upper hub. The drive of the discs is transmitted by means of bevel gears with high diameter, which increases the resistance of the disc in case of hitting into an immovable obstacle.

 

2 Comparison of bevel gears
Our mowers are equipped with Perfect CUT cutterbars based on bevel gears transmitting higher strength.
       
5 Perfect quality of cut with Perfect CUT cutterbar
New Perfect Cut cutterbars have high quality of cutting even with very low grass during 3, 4 and further cuts. During 1 and 2 cut when high grass prevails it is recommended to cut with height between 53 mm and 68 mm. Depending on the angle of cutterbar's inclination there are the following cutting heights.
       
3 Perfectly profiled design
Rounded shapes of cutterbar's bottom surpass the designs of other manufacturers. Streamline shape facilitates operation on more earthen and stoney meadows. No sharp edges on the whole cutterbar, smooth surfaces of sliding skids give protection to the turf.
       
4
Quick knife replacement by means of special key.

 




Folders

 

 

ENG1

   
  DISC MOWERS  
 

pdf_ikona

Document size: 7,5 MB  



 


Gallery

 

KDD-1 KDD-2 KDD-3 KDD-4    
KDD-5 KDD-6 KOSIARKI DYSKOWE/KDD R KOSIARKI DYSKOWE/KDD R