Offer

KBRP - REAR-SIDE FLAIL MOWERS


Description

 

Side rear flail mowers with parallelogram arm
Type KBRP 160 KBRP 200
Working width [m] 1,60 2,00
Number of knives [pcs.] 14 16
RPM [rpm./min] 540 540
Power demand [HP] from 70 from 80
Working capacity [ha/h] 1,00 1,60
Hedge cutting 0÷90° 0÷90°
Mowing of road sides 0÷60° 0÷60°
Tractor class II II
Weight [kg] 760 825


 




Technical Details

0
 

The KBRP rear-side mowers on a pantograph complete our offer of heavy duty machinery for maintaining green areas and roads. These machines fulfill the expectations of companies providing agricultural services and municipal services.

High quality and exceptional durability of components guarantee reliable operation even with the working time exceeding 1500 work hours per year.

The downward tilt angle can reach up to 60°. The expansion valve (see magnifying glass) on the actuator enables smooth adjustment of mower’s position.

 
FLAIL KNIVES
 
STANDARD ON DEMAND
1 2 3 4
TYP I TYP II TYP III TYP IV

 

Type I flail knives are characterized by weight (1 kg) and hardness. It is the most popular type.
Type II knives are very popular in western countries. They demand good conditions of operation.
Type III knives - for mulching bushes
Type IV knives – for grass, straw, corn and tobacco stems and after harvest remnants.




1


The KBRP mowers have two types of mechanical protection:

1. Those allowing the lifting of the cutting unit when encountering an obstacle,
2. Those which tilt the cutting unit back when encountering an obstacle.


Proper use:

1. Mowing of thickets and bushes (up to 10 cm in diameter),
2. Mowing of escarpments, embankments, meliorative ditches and water channels.

Advantages:

1. The mowers are characterized by a high scope of operation vertically (up to 70 cm) which allows avoiding obstacles (such as road signs) without changing the course of the tractor,
2. Allows working on the side as well as behind the tractor,
3. New working shaft made of thick-walled 168 mm diameter pipe,
4. Mechanical safety as part of standard equipment,
5. High quality flail knives,
6. New shaft bearings - larger bearings are located inside the suspension frame, which protects them from mechanical damage,
7. Hydraulic control as part of standard equipment,
8. The ability to mow surfaces inclined +90° - 60°,
9. Internal layer of the cutting unit is made of wear resistant steel - increased durability and wear protection,
10. Thanks to the pantograph it is ideal for tough applications,
11. The mower is mounted on a standard three point suspension system of the tractor,
12. Ideal adjustment to the ground and even working height,
13. Tough wide-angle articulated telescoping shaft.



 

3   Working reach of KBRP mowers [mm]
TYPE A B C D E
KBRP 160 2050 520 2890 1600 1400
KBRP 200 2050 520 3290 2000 1800




A KBRP mower mounted on an extending arm thanks to a wide reach (172 cm) can be used as a rear or a side mower.

 

  5 The KBRP type mowers are mounted on the back of the tractor. These machines are ideal for mowing roadside shoulders, escarpments, green spaces (inclines up to -60°; +90°). Equipped with type I knives they can mulch branches with diameters up to 10 cm.

 

The KBRP mulchers on a pantograph fulfill the expectations of municipal companies as well as farmers who provide services mowing roadside shoulders, escarpments, embankments, meliorative ditches and water channels. A new, stronger configuration of the bearings of the flail shaft has been employed. The bearings are located inside the suspension frame which protects them from mechanical damage.

 

8









Folders


 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  

 


Gallery

 

KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER
KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER KBRP - REAR-SIDE FLAIL MOWER