Offer

KANGU - middle class


Description

 

 
Type KANGU 140 KANGU 190
Working width [m] 1,40 1,90
Number of knives [pcs.] 26 34
Operation shaft diameter [mm] 133
RPM 540
Power demand [HP] from 50 from 70
Working capacity [ha/h] 1,20 1,80
3-point linkage cat. II
Hydraulic transverse adjustment [mm] 1200 1600
Demanded quantity of hydraulic connectors [pcs.]

4

Lenght [cm] 207 207
Width [cm] 198 248
Height [cm] 167 167
Weight [kg] 540 660


Technical Details

5
 

FLAIL MOWERS REAR AND SIDE ON PANTOGRAH

MIDDLE CLASS


  Middle class flail mower is designed for mowing road shoulders, ditches, slopes and treatment of green areas (orchards, vineyards). Kangu mower can be aggregated typically with tractors on tractor’s 3-point linkage Cat. II (3-point linkage Cat. II). Flail shaft is powered by tractor’s PTO shaft, while the shift by tractor’s hydraulics.  Owing to application of a parallelogram arm mowing is possible in various positions (from - 60o up to + 90o) , while perfect ground following provides optimal mowing quality. Kangu features standard-offered mechanical safety breakaway device and wide-angle shaft. Large number of knives and replaceable counter-knives provide good quality of cut material shredding.

 

1 Mower can be mounted at rear also. Mower is additionally equipped with transverse shift option to provide easier passing of obstacles and adjusting the most comfortable turning.
   


Designation:

Middle class flail mower is designed for mowing road shoulders and operation on green areas (orchards, vineyards).

Advantages:

1. Flail knives of high quality
2. Large ground following roller
3. Mower’s body is made of steel
4. Mower is mounted on a standard
tractor’s 3-point linkage
5. Thanks to application of a pantograph mowing is possible in many positions
6. Standard hydraulic control
7. Cross traverse by 160 cm possible
8. Innovative solution for protection of bearings and their lubrication
9. Perfect fitting to ground and optimal mowing quality
10. Standard mechanical safety breakaway device
11. Standard PTO shaft
 

 

FLAIL KNIFE TYPES
Typ V

KNIFE TYPE V

 

Designation:

 

-grass,

-stubbles
-cornstalks,

-branches,

-shrubs
-Max. diameter of cut branches: ϕ 50 mm

 

 

FLAIL MOWERS - MULCHERS

 
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar

     
 



Folders


 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  

 




 


Gallery

 

1 (1)          
           

 

Additional Equipment


 

FLAIL KNIFE TYPES
 
STANDARD OPTION
1 1 1 1
TYPE V TYPE II TYPE III TYPE IV

 



KNIFE TYPE V - Designation: grass, stubbles, cornstalks, branches, shrubs, Max. diameter of cut branches: ϕ 50 mm
KNIFE TYPE II - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE III - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE IV - Designation: grass, tobacco, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

Kosiarki serii KBK o szerokościach roboczych 2,00 m i 2,50 m zostały zaprojektowane w szczególności z myślą o rolnictwie. Znajdują one zastosowanie przy mulczowaniu trawy, kukurydzy oraz resztek przyciętych gałęzi. Zostały one wyposażone w otwierana klapę wyrzutową, która znacznie ułatwia obsługę kosiarki oraz zapewnia swobodny rozrzut pokosu na zewnątrz maszyny, co wpływa na mniejsze zapotrzebowanie na moc ciągnika.
Wzmocniono równiez układ zawieszenia tak, aby sprostał jeszcze większym obciążeniom. Wewnętrzna obudowa mulczera składa się z dwóch płaszczy, z których wewnętrzny wykonany jest ze stali trudnościeralnej HARDOX.
Kosiarki serii KBK idealnie nadają się do pracy na ścierniskach kukurydzy, zbóż i innych upraw. Szczególnego znaczenia nabiera w ostatnich latach mulczowanie rżyska kukurydzy, jako skutecznego sposobu zwalczania omacnicy prosowianki, coraz bardziej zagrażającej kukurydzianym plantacjom. Zmulczowanie rżyska kukurydzy przyspiesza rozkład i niszczy znaczną liczbę gąsienic omacnicy prosowianki oraz dużą część zarodników grzybów chorobotwórczych w rżyskach zbóż.