Offer

MAMUT



Description

 

 

Nowosc_20x10_PL

Nowosc_20x10_PL

Type MAMUT 250 MAMUT 280
Operating width [cm] 250 280
Operating output [ha/h] ~2,5 ~ 2,8
Tractor power [HP] 100 120
Knives [pcs.] 30 36
3-point linkage Cat. II II
Transport Width [cm] 270 300
PTO [rpm] 1000 1000
Cutting shaft diameter [mm] 203 203
Hydraulic transverse adjustment [mm] 500 500
Demanded quantity of hydraulic connectors [pcs.] 2 2
V-belts quantity 5 5
Cutting height regulation Yes Yes
Replaceable counter-knives Yes Yes
Automatic cleaning of copying shaft Yes Yes
Automatic tensioning of V-belts Yes Yes
Slides Yes Yes
Height / Lenght [cm] 106 / 124 105 / 124
Weight [kg] 960 1050

 


Technical Details

IMG_7757
 

Heavy duty flail mower is designed for mulching soil fertalisation aiding plants (lupinus, phacelia, sinapis, rapeseed, field pea, rye) before tillage as well as plant remains like thick stalks as corn stalks for ploughing. It is also used for treatment of sterile pastures and maintenance of green areas which are not cultivated.

Mamut can be aggregated typically with tractors on tractor’s 3-point linkage Cat. II (3-point linkage Cat. II). Flail shaft is powered by tractor’s PTO shaft, while the shift by tractor’s hydraulics. Mower can be mounted both at tractor’s rear and front, which improves general comfort of operation. Mower is additionally equipped with transverse shift option to provide easier passing of obstacles and adjusting the most comfortable turning.

 

Advantages:

1. Cross traverse by 50 cm possible
2. Large working width providing efficiency
3. Mounting mower both at tractor’s rear and front possible
4. Large diameter of flail shaft (ϕ 203 mm) improves its stiffness and peripheral speed of knives
5. Innovative solution for protection of bearings and their lubrication
6. Mower’s body is made of 7 mm thick steel, owing to which mower’s overall weight has been reduced
7. Mower is equipped with new generation of heavy solid flails
8. Perfect fitting to ground and optimal mowing quality
9. Quick replacement of flail knives
10. Standard-delivered PTO shaft
11. Solid and durable construction
12. Simple flail replacement

 
 
FLAIL KNIFE TYPES
Typ VII

KNIFE TYPE VI

 

Designation:

-grass,

-shrubs,

-stalks,
-trimming remnants,

-stubbles
-Max. diameter of cut branches: ϕ 80 mm

 

FLAIL MOWERS - MULCHERS

 
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar

     

Gallery

 

1 2

Additional Equipment

 

FLAIL KNIFE TYPES
 
STANDARD OPTION
1 1 1 1
TYPE VI TYPE II TYPE III TYPE IV



KNIFE TYPE VI - Designation: grass, shrubs, stalks, trimming remnants, stubbles, Max. diameter of cut branches: ϕ 80 mm
KNIFE TYPE II - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE III - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE IV - Designation: grass, tobacco, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm