Offer

GRINO


Description

 

 
TypeGRINO 180GRINO 200GRINO 220
Operating width [cm] 180 200 220
Operating output [ha/h] ~ 1,6 ~ 1,8 ~ 2,0
Tractor power [HP] 60 70 80
PTO [rpm] 540 / 1000
Demanded quantity of hydraulic connectors [pcs.] 2
Cutting shaft diameter [mm] 168
V-belts quantity 4
Knives [pcs.] 24 30 36
3-point linkage Cat. I / II
Hydraulic transverse adjustment [mm] 500
Width [cm] 205 225 245
Height / Lenght [cm] 104/ 115
Weight [kg] 570 610 640

Technical Details

 

Grino can be aggregated typically with tractors on a tractor’s 3-point linkage of Cat. I or II (Cat. II / Cat. II). Flail shaft is powered by tractor’s PTO shaft, while the shift by tractor’s hydraulics. Mower can be mounted both at tractor’s rear and front, which improves general comfort of operation. Mower is additionally equipped with transverse shift option to provide easier passing of obstacles and adjusting the most comfortable turning.

Designation:

1. Mowing shrubs and bushes, shredding branches of max. diameter of 5 cm
2. Cutting weeds and grass on uncultivated areas, treatment of sterile pastures and operation on green areas (orchards, vineyards)

Advantages:

 

1. Drive transmission by belt gear functions as overload clutch

2. In order to prepare mower for operation at tractor’s front, re-mount upper holder at mower’s opposite side and re-install it at PTO shaft’s opposite side. If tractor features left-hand rears, these can be user-changed by dismounting central gear and turning it around by 180°

3. Mower is hydraulically adjustable in relation to either tractor’s left or right side. Features standard-mounted hydraulic cylinder

4. New stronger housing has been designed to provide effective protection of bearings against dirt, while extending mower’s lifespan

 

1. Properly adjusted flail’s weight (0.7kg) and precise mounting and arrangement of bolts on shaft provide mower’s effective operation in difficult conditions
2. Large diameter of flail shaft (ϕ 168 mm) improves its stiffness and peripheral speed of knives
3. Mounting on 3-point linkage at tractor’s front or rear
4. Simple replacement of flail knives
5. Silent operation of flail shaft

6. Perfect fitting to ground and optimal mowing height
7. Top-quality metal sheet guards at mower’s front and rubber guard at mower’s rear provide effective protection against thrown out stones
8. Standard-delivered PTO shaft
9. Adjustment of mowing height within range of 3 and 8 cm with use of ground following bar
10. Strengthened enclosure and enhanced bearings of flail shaft
11. Easily replaceable skids made of durable steel
12. Additional internal and side strengthening of enclosure made of hard and durable steel
13. Standard-delivered overrunning clutch in intersecting axis gear
14. Innovative solution for protection of bearings and their lubrication
15. Cross traverse by 50 cm possible

 

RODZAJE NOŻY BIJAKOWYCH
Typ V

KNIFE TYPE V

 

Designation: grass, stubbles
cornstalks, branches, shrubs
Max. diameter of cut branches: ϕ 50 mm

 

FLAIL MOWERS - MULCHERS

 
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar

 

Gallery

 

   
           



Folders

 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  

 


Additional Equipment

FLAIL KNIFE TYPES
 
STANDARD OPTION
1 1 1 1
TYPE V TYPE II TYPE III TYPE IV

 


KNIFE TYPE V - Designation: grass, stubbles, cornstalks, branches, shrubs, Max. diameter of cut branches: ϕ 50 mm
KNIFE TYPE I - Designation: grass shrubs, stalks, trimming remnants, stubbles, Max. diameter of cut branches: ϕ 80 mm
KNIFE TYPE III - Designation: grass, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm

KNIFE TYPE IV - Designation: grass, tobacco, shoots, spikes, stalks, shrubs, mowing remnants, hay, Max. diameter of cut branches: ϕ 35 mm