Offer

PIKO мульчирователи легкого класса


Description

 

 
Type PIKO 100 PIKO 100 H PIKO 130 PIKO 130 H PIKO 150 PIKO 150 H
Operating width [cm] 100 100 130 130 150 150
Operating output [ha/h] ~ 1,0 ~ 1,0 ~ 1,3 ~ 1,3 ~ 1,5 ~ 1,5
Tractor power [HP] 20 20 30 30 35 35
PTO [rpm] 540
Demanded quantity of hydraulic connectors [pcs.] - 2 - 2 - 2
Cutting shaft diameter [mm] 108
V-belts quantity 3
Knives [pcs.] 26 26 34 34 40 40
Replaceable counter-knives Yes
3-point linkage Cat. I
Transport width cm] 129 129 159 159 179 179
Height / Lenght [mm] 835 / 870
Weight [kg] 175 205 200 230 220 250


 


Technical Details

 

1
 

PIKO mower is designed for treatment of recreational areas, squares, pitches and idle areas. PIKO mower is perfect for aggregation with low-power orchard tractors. Upon mowing, leaves even and smooth surface. Application of highly durable materials provides long and reliable operation. Effectively sealed bearings and their high durability provide long, fault-free operation of essential subassemblies. PIKO mower can be aggregated typically with tractors on a tractor’s 3-point linkage Cat. I (3-point linkage Cat. I).  Mower can be mounted both at tractor’s rear and front, which improves general comfort of operation.
 
Mower is optionally equipped with hydraulic shift (H) to provide easier passing of obstacles and adjusting the most comfortable turning.

Advantages:

 

1. Cross traverse by 32 cm possible (option)
2. Mounting mower both at tractor’s rear and front possible
3. Innovative solution for protection of bearings and their lubrication
4. Mower is equipped with 3 types of knives: light of metal sheet, heavy forged and Y-type knives
5. Mower’s body has casing featuring high resistance to abrasion
6. Standard PTO shaft

 
 
Flail knife types
Typ VII

KNIFE TYPE VII

 

Designation:

-grass,

-plant stalks
-Max. diameter of cut branches: ϕ 20 mm




FLAIL MOWERS - MULCHERS
Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.
 

LIGHT CLASS - „LAMA”

 

1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions

 

MIDDLE CLASS

 

1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions


4
 

HEAVY DUTY

 

1. Drive shaft with increased diameter -
ϕ 168 mm or ϕ 203 mm (Mamut, Rio)
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of steel
6. Bars resistant to deflections
7. Higher durability of thick-walled drive shaft and ground folowing bar

     
 

 


Gallery

 

1 2 3 4 5 6
7 8 9 10 11

 


Folders

 

 


 

 

ENG4

   
  FLAIL MOWERS - MULCHERS  
 

pdf_ikona

Document size: 4,4 MB  

 

 

Additional Equipment

 

Flail knife types
 
STANDARD OPTION
1 1 1
VII VIII X

 



KNIFE TYPE VII - Designation: grass, plant stalks, Max. diameter of cut branches: ϕ 20 mm
KNIFE TYPE VIII - Designation: grass, plant stalks, shrubs, shoots, thin branches, Max. diameter of cut branches: ϕ 20 mm

KNIFE TYPE X - Designation: grass, plant stalks, small shrubs, branches, Max. diameter of cut branches: ϕ 35 mm